TRUCK TERMINAL AUTOMATION
The lot is complete before the barrier lifts.
Bags are counted on the conveyor as they load, the running count is verified against the dispatch lot and cross-checked on weight, and the bay barrier releases the truck only when the lot is proven complete — printing a dispatch slip from measured data, not from a number in someone’s head. Deployed at cement and fertilizer dispatch gates.
Gate to slip: bags counted → count verified against lot → weight cross-check → lot complete → barrier lifts → dispatch slip printed — every load, on record.
The dispatch gate, instrumented end to end
Counting, weighing and the barrier are tied together, so a truck can only leave on a lot that has been measured — and every load leaves a record.
Count
Bags counted on the conveyor by hybrid sensing.
Verify
Running count checked against the dispatch lot.
Weigh
Cross-checked on load cell / weighbridge net weight.
Gate
Bay barrier releases only on a complete lot.
Slip
Dispatch slip printed from measured data.
Dashboard
Live bay status, throughput & history to cloud.
What it fixes
Counted by eye
At loading speed a hand-count is unreliable. Hybrid sensing counts every bag onto the truck, accurately, at line speed.
No evidence in a dispute
When the customer disputes the quantity received, there was nothing to show. Now the count and the net weight agree — and it is on record.
Barrier opened on a shout
The gate used to open on someone’s word. Now it releases only when the lot is proven complete — short loads cannot leave.
Slip written after the fact
The dispatch slip was filled in from a number nobody could verify. Now it prints from measured data at the moment of release.
Where it runs
In service: cement producers, from the bagging line to the dispatch gate. Truck Terminal is also available as a module of the Production Genie integrated platform.
HOW IT WORKS
Truck in → verified lot → gate out
The same sequence you just watched in the animation, step by step:
- Truck arrives at the bay. The vehicle is identified at the loading bay and linked to its dispatch order and lot size. The bay status board shows LOADING.
- Bags counted on the conveyor. As bags load, they are counted on the conveyor by hybrid sensing — a vision camera and an IR break-beam together — so the count holds at loading speed and no bag is missed or double-counted. HYBRID COUNT
- Count verified against the lot. The running count is checked live against the dispatch lot for that truck — the board shows how many of the target have loaded, and a short pack is flagged on the spot.
- Cross-checked on weight. The count is cross-checked against net weight from a load cell / weighbridge — count and weight must agree, catching a wrong bag weight or a miscount either way. COUNT × WEIGHT AGREE
- Lot complete → barrier releases. Only when the lot is proven complete does the bay barrier release the vehicle. A short or over load holds the gate — the truck cannot leave on an unverified count. GATE ON COMPLETE LOT
- Dispatch slip printed. A dispatch slip is printed from the measured data — count, net weight, lot and time — and the load is logged to the live dashboard and cloud. SLIP FROM MEASURED DATA
HARDWARE
Sensing, weighing and gate control
Rugged, dusty-environment hardware — and, because KVAR builds its own displays and controllers, the bay board and the edge box are ours too.
Vision camera + IR break-beam counter
- Vision camera with edge controller counts bags on the conveyor
- IR break-beam confirms each bag — hybrid sensing for accuracy at speed
- Rejects double-counts and gaps; holds up in cement dust
- Mounts over the existing loading conveyor
Weight verification
- Load cell / weighbridge gives net dispatched weight
- Cross-checked against the bag count in real time
- Catches a wrong bag weight or a miscount
Bay camera & barrier control
- Truck-bay camera and boom-barrier control
- Barrier interlocked to the lot-complete signal
- Releases the vehicle only on a verified lot
Bay status display & edge controller
- Large KVAR display shows count, target and bay status
- Edge controller ties camera, beam, weigh and barrier together
- Runs on the local network with cloud sync
SOFTWARE
The bay dashboard and the dispatch record
One screen for the bay, one record for every load — both fed automatically by the count, the weight and the gate.
Live bay dashboard
Every bay, the truck in it, count vs target and status at a glance — loading, complete or held.
Count × weight cross-check
Bag count and net weight reconciled in real time; a mismatch is flagged before the gate opens.
Lot-complete & barrier logic
The rule that releases the barrier only on a verified, complete lot — short and over loads held.
Dispatch slip generation
Prints the slip from measured data — count, net weight, lot, truck and time.
Cloud sync
Every load synced to the cloud — live from anywhere, and safe off-site.
Throughput & reports
Trucks dispatched, bags & tonnes loaded, loading time per truck, short-load exceptions — daily and by bay.
EDITIONS & ROI
Basic, Advanced, Premium
Start with a counted, displayed bay; add weight cross-check and gate interlock; scale to multi-bay dispatch with ERP integration — hardware and software together.
BASIC
Count & display
Hybrid bag counting on the conveyor with a bay status display and count-vs-lot on screen, plus a daily dispatch count. Accurate counting from day one.
ADVANCED
Weigh, gate & slip
Adds weight cross-check, lot-complete barrier interlock, dispatch-slip printing, the live bay dashboard and the full report set.
PREMIUM
Multi-bay & connect
Adds multi-bay dashboards, cloud roll-up across sites, ERP / dispatch-system integration and exception analytics.
| CAPABILITY | BASIC | ADVANCED | PREMIUM |
|---|---|---|---|
| Hybrid bag counting (camera + beam) | ✓ | ✓ | ✓ |
| Bay status display & count vs lot | ✓ | ✓ | ✓ |
| Weight cross-check | OPT | ✓ | ✓ |
| Lot-complete barrier interlock | – | ✓ | ✓ |
| Dispatch-slip printing | – | ✓ | ✓ |
| Live bay dashboard | OPT | ✓ | ✓ |
| Cloud sync | OPT | ✓ | ✓ |
| Multi-bay / multi-site roll-up | – | – | ✓ |
| ERP / dispatch-system integration | – | OPT | ✓ |
✓ included OPT optional add-on – not in this edition. ERP interface subject to the plant system offering one.
Return on investment
From a count in someone’s head — to a lot measured, weighed and proven before the truck moves.
The Truck Terminal solution is configured to the bay — conveyor, sensing, weighing, barrier and dispatch rules are set to the plant. Hardware and editions are matched to the requirement, and a firm quotation is prepared against it. Truck Terminal is also available as a module of the Production Genie integrated platform. Product photographs to follow. Contact KVAR Technologies for a survey of your dispatch bays and a sized proposal.
NEXT STEP
Survey your dispatch bays
- Tell us the bay — conveyor, lot sizes, weighing and the barrier you have
- We survey the dispatch gate and size the sensing, weighing, display and edition
- Pilot one bay — then roll out across bays and sites on the same platform
Phone: 022 6899 0651-52 · 7506 059922 · Email: sales@kvartech.com
www.kvartech.com · Future-ready. Today.
