TEST & MEASUREMENT INSTRUMENTS
Precision instruments that prove the quality.
A family of high-precision, microprocessor-based test and measurement instruments — the Bursting Strength Tester for paper, board and packaging, the ECOS / VCTS Electrical Check Out System for vehicle electrical testing on the line, and the KV 2500 Ampere-Hour meters. Every one is built for fast, accurate, repeatable results, with PC / Windows software for data acquisition, analysis, reporting and full traceability.
Accurate on the bench, connected to the PC or the line — every test recorded, every result reportable, every unit traceable.

Three instruments, one QC philosophy
Different tests, the same DNA — precision sensing, microprocessor control, and software that records, reports and traces every result.
Bursting Strength Tester
Rupture pressure of paper, board, corrugated, textile, leather & packaging.
ECOS / VCTS
Computerized vehicle electrical-circuit testing on the assembly line.
Ampere-Hour meters
KV 2500 Series AH metering with set-points & relay trips.
Panel instruments
RPM, timers, counters, flow — the measurement backbone.
PC / Windows software
Data acquisition, SPC, reports, history & traceability.
Custom test rigs
Instruments engineered to a specific test.
What ties them together
High-accuracy measurement
Precision sensing and engineering for results you can trust and defend against a standard.
Microprocessor / computerized
Digital controllers and Windows software — consistent, repeatable, self-calibrating.
PC connectivity
RS-232 / RS485 / Wi-Fi to a PC for live monitoring, storage and reports.
Data & traceability
Results stored, retrieved, exported and SPC-analysed — documentation built in.
Built for
INSTRUMENT 01
Bursting Strength Tester
Determines the bursting strength of a material — the maximum hydraulic pressure a specimen withstands before it ruptures.
Designed with advanced electronics and precision engineering, the tester delivers fast, accurate and repeatable results across paper, paperboard, corrugated boxes, textiles, leather, non-woven fabrics and packaging materials. It is equipped with RS-232 communication and dedicated PC software for data transfer, test monitoring, report generation and result management — helping manufacturers ensure product durability and compliance with quality standards.
Key features
PC software
Live monitoring
Watch the test on the PC as pressure builds to rupture.
Auto-storage & reports
Every result stored automatically; reports generated and printed.
History & export
Retrieve past tests and export data for analysis and traceability.
INSTRUMENT 02
ECOS — Electrical Check Out System
Also known as the Vehicle Current Testing System (VCTS) — a computerized solution that verifies a vehicle’s electrical circuits quickly, accurately and reliably.
ECOS automatically measures, records and analyses the voltage and current of a vehicle’s electrical circuits, cutting testing time while improving production efficiency and quality control. Built for automotive manufacturing and assembly lines, it eliminates manual testing errors with automated data acquisition, real-time analysis and comprehensive reports. Programmable test sequences and model-specific configurations let one line test multiple vehicle variants.
Key features
System components
Industrial PC
With preloaded VCTS Windows software.
Rack-mounted controller
Industrial rack controller.
Monitor, keyboard, mouse
Operator console.
UPS
Uninterrupted operation.
Wi-Fi interface
Wireless communication.
Calibration unit
On-site calibration.
PDA remote
Handheld controller.
DC Tong Current Tester
Battery clamps + shielded cable.
Benefits
INSTRUMENT 03
Ampere-Hour Meters — KV 2500 Series
Measure and display ampere-hours — the charge (current × time) that has actually passed — wherever the quantity of current, not just its value, is what matters.
The KV 2500 / IM 25xx Series is a family of 15+ panel-mounting, microprocessor-based Ampere-Hour meters. A 7-segment LED display reads ampere-hours and live current, with programmable set-points driving relay outputs. Current is read through a 0–75 mV shunt (programmable from the keyboard), and a floating decimal point auto-selects to the shunt value — ideal for battery, plating and process duty where the charge passed decides the result.
Features
Specifications
| PARAMETER | SPECIFICATION |
|---|---|
| Display | 7-segment LED, 4 or 6 digit; floating decimal point auto-selected by shunt |
| Shunt input | 0–75 mV, programmable from the keyboard |
| Ampere-hour range | 0–500 Ah up to 0-999999 Ah (model dependent) |
| Outputs | Relay 230 V / 5 A; preset with relay; external reset input |
| Communication | RS485, Modbus, 4–20 mA, 0–10 V (optional) |
| Power supply | 110–230 VAC / 10-30, 24-48, 48-72, 110–230 VDC; battery backup option |
| Enclosure | Panel mount 96 × 96 × 150 mm, MS box, ~1 kg |
| Programming | Dust-proof membrane keyboard |
Model variants
IM2501 / IM2506
Standard 4-digit / 6-digit meters (up to 0-999999 Ah).
IM2503 / IM2509
Doser control — 2 / 3 relays for plating chemical dosing.
IM2505
Large battery-bank charge tracking.
IM2507
Dual displays — separate charge / discharge.
IM2511
Logger — DC voltage, current & energy over time.
IM2513
Central controller — up to 8 meters / injection points.
Where it is used
Battery monitoring
Charge / discharge & capacity; large banks, UPS & inverters.
Electroplating
Gold / silver / nickel plating dose by Ah; doser control.
Metal finishing & anodizing
Consistent coating by charge passed.
Solar charging
Charge measurement in solar systems.
Water treatment
Chlorination / dosing by ampere-hours.
R&D & process
Measured charge for electrolysis & experiments.
15+ variants — current range, shunt, display, communication and set-point / relay / doser configuration are set to the application. Ampere-Hour meters also appear in the panel-instruments range on the Panel Instruments tab.
In service


PANEL INSTRUMENTS
The measurement backbone
Panel-mount indicators, counters and totalisers — RPM, length, batch, flow and time — the everyday instruments that keep a line measured and controlled.
RPM indicators
6-digit; NPN / PNP / encoder input; Modbus RS485; SD-card logger variant. RPM / RPS or custom units (m/min, L/min) — paper, textile, flow.
Timers & counters
Preset, length (programmable wheel dia.), batch, up/down; 4 & 6 digit with relay outputs — wire drawing, yarn winding, batching, length control.
Flow totaliser & counters
Special-purpose counters and flow totalising for batching, dosing and utilities.
Ampere-Hour meters
Programmable AH, Industrial KAH, IM 2501, IM 2511 (AH + timer), DC watt meter — full range on the Ampere-Hour Meters tab.
Ethernet module
Modbus-TCP bridge — brings legacy instruments onto the network.
OEM modules
Board-level metering modules (e.g. TE2504) to embed into your own product.
Ranges, inputs (NPN / PNP / encoder / analog) and communication (RS485 / Modbus / Ethernet) are configured to the application.
APPLICATIONS & ROI
On the bench, on the PC, or on the line
Take an instrument on its own, connected to the PC software for records, or integrated into the production line for end-of-line testing.
OPTION 01
Standalone instrument
- Bursting Strength Tester or AH meter on the bench / panel
- Real-time on-instrument display
- Microprocessor controller, rugged build
- Fast, accurate, repeatable
For a QC check used on the spot.
OPTION 02
Instrument + PC software
- RS-232 / RS485 link to the software
- Live monitoring, auto-storage, reports
- History, export, SPC & traceability
- Audit-ready documentation
For a lab that must record, report and trace every test.
OPTION 03
Integrated on the line
- ECOS / VCTS at end-of-line
- Programmable, model-specific sequences
- Wi-Fi, PDA remote, multi-user security
- Automatic reports & reject analysis
For automotive EOL and high-volume testing.
Applications across the range
Return on investment
From a reading on a dial — to a test recorded, reported and traceable.
Testing instruments are configured to the material, vehicle, test and standard; measuring ranges, capacities, shunts and test sequences are fixed against the model and requirement, and a firm quotation is prepared against it. Contact KVAR Technologies for the specification and a demonstration.
NEXT STEP
Spec an instrument to your test
- Tell us the material, vehicle or parameter — and the standard you test to
- We configure the range, shunt, sequence and PC software to your requirement
- Use it standalone, connected to the PC for records, or integrated on the line
Phone: 022 6899 0651-52 · 7506 059922 · Email: sales@kvartech.com
www.kvartech.com · Future-ready. Today.
