KVARSince 1988

Know your output before the shift ends, not after.

Output against target, downtime with the reason attached, and OEE you can defend — captured from the machine itself rather than typed into a sheet the next morning.

The problem with end-of-shift numbers

In most plants, production is counted at the end of the shift and typed into a spreadsheet the next morning. By then the number is an estimate, the downtime reasons are reconstructed from memory, and nobody can tie a loss back to a machine, a shift or an operator. The data arrives too late to act on and is too soft to argue with.

Production Genie closes that gap. Counters on the machine record output as it happens. Stoppages are captured with a reason code at the moment they occur. The number on the floor display and the number in the browser are the same number, and both are current.

What it measures

  • Availability: run time against planned time, with every stoppage logged and reason-coded.
  • Performance: actual cycle rate against the rated rate for the part being made.
  • Quality: good pieces against total pieces, captured in line rather than reconciled later.
  • OEE: the product of the three, by machine, by line, by shift, by operator and by part.

The modules

Production Genie is modular on purpose. Most plants start with one module on one line and add from there. Everything shares the same database, the same logins and the same cloud, so the second module is a fraction of the cost of the first.

Production Genie — modules
ModuleWhat it doesTypical first users
Production trackingOutput against target in real time, by machine and shiftProduction head, shift supervisors
Downtime & AndonStoppage capture with reason codes and timed escalationMaintenance, line supervisors
OEE analysisAvailability, performance and quality rolled into defensible OEEPlant head, continuous improvement
PlanningSchedules built against real measured capacity, not assumed capacityProduction planning, sales
QualityIn-line inspection capture tied to machine, shift and operatorQuality assurance
Truck terminalWeighbridge, vehicle and loading records tied to the production recordStores and dispatch
Process & flowContinuous process parameters and flow totals alongside outputProcess and utilities
MaintenancePreventive schedules driven by measured run hours, not the calendarMaintenance planning

The standalone smart OEE monitor

Where a full platform is more than you need, the Production Genie smart monitor does the core job on a single machine: live output against a pro-rated target, OEE, downtime with reasons, per-shift and per-operator data, and an on-board web dashboard. It comes in LED and LCD models, and connects to KLOG Cloud for shift and top-loss reports. Many plants start here and add modules and lines on the same platform as they grow.

It is not an ERP, and that is deliberate

Production Genie does not replace SAP, Tally, Oracle or whatever you already run, and we will say so in the first meeting. It is the measurement layer underneath. Targets and work orders come in; measured actuals go out, through REST API or scheduled Excel and CSV. The ERP keeps owning commercial truth. Production Genie owns physical truth.

What it connects to on the floor

Modbus RTU and TCP, Profibus, RS-485 and RS-232, 4–20 mA, direct PLC I/O, proximity sensors, encoders, weighbridges and ANPR cameras. Where a machine has no usable signal at all, we add a KVAR counter or machine monitor to create one — which is the advantage of building our own hardware.

Try it before you buy it

The live factory demo runs entirely in your browser with no install and no sign-up. It walks a real order from enquiry through planning, production, quality and dispatch, so you can see the shape of the system before anyone visits your plant.

Common questions

Can we start with one machine?

Yes, and we would encourage it. One machine or one line is the normal first deployment. It proves the numbers against what your supervisors already believe, which is the conversation that decides whether the rest gets funded.

Our machines are old. Will this work?

Usually. We have instrumented equipment from the 1990s onwards. If a machine exposes no signal we can read, we add a sensor or a KVAR machine monitor to create one. Send us a photo of the panel and we will tell you honestly whether it is practical.

Will operators actually enter downtime reasons?

They do when it takes one press on a station they can reach without leaving the machine, and when the reason list is short and written in their language. If the capture method is a form on a shared PC in the supervisor's office, they will not. We design for the first case.

How does it reach our ERP?

REST API, or scheduled Excel and CSV if your IT prefers files. We have pushed production data into SAP, Tally, Oracle and Microsoft stacks. We do not ask you to change your ERP.

How long does a deployment take?

A single line at basic scope typically goes live in days rather than quarters, because the hardware, software and displays come from one place and are already designed to work together. A multi-line, multi-module rollout is a project and we will give you a phased plan.

Tell us about the line you want to measure first.

Get a proposal