OEM & ELECTRONICS MANUFACTURING SERVICES
Your product. Our four decades of building electronics.
KVAR Technologies has designed and manufactured embedded, microcontroller-based products for industrial use for almost 40 years. That same engineering and factory is open to you as an OEM partner — take a specification, a sketch or an ageing legacy board, and we return a designed, built, tested and serial-numbered product ready to carry your name. From one prototype to volume production, under one roof.
Bring the idea or the spec. We do the hardware, the firmware, the enclosure, the build and the test — and it ships as your product.

~40 yrs
designing & making embedded products
Design→Ship
hardware, firmware, mechanical, build & test in-house
1 → volume
prototype, pilot and production runs
White-label
your brand, our engineering
One partner, concept to carton
Most electronics needs three vendors — a design house, a PCB assembler and someone to box and test it. KVAR is all three, so nothing falls through the gap between them.
Design
Circuit, PCB, firmware and mechanical from a spec.
Prototype
Working samples, iterated fast, in-house.
Assemble
PCB & SMT assembly, through-hole, box build.
Test
Functional test & burn-in before it ships.
Brand
Your label, enclosure, firmware identity.
Support
Revisions, spares and long-life supply.
Who partners with us
Product companies & start-ups
You own the idea and the market — we turn it into a manufacturable, tested product without you building a hardware team.
Machine builders & OEMs
An embedded controller, panel or display board designed to fit inside your machine and carry your brand.
Legacy re-engineering
An old board that is going obsolete — we re-engineer it to modern, available parts and keep your product alive.
Volume manufacturing
A proven design you need built reliably, batch after batch, with proper test and traceability.
Sectors we build for
DESIGN & ENGINEERING
We design the whole product, not just the board
Electronics, the code that runs on it, the box it lives in and the cloud it talks to — engineered together so the pieces actually fit.
Hardware & PCB design
Schematic capture and multi-layer PCB design around 8/16/32-bit microcontrollers and ARM — analog, digital, power and signal, for cost and for manufacture.
Firmware & embedded software
Bare-metal and RTOS firmware, device drivers, communication stacks and field-update — the intelligence inside the product.
Mechanical & enclosure
Enclosure design and selection, panel layout, fascia, sealing and mounting — sheet-metal or moulded, indoor or field-grade.
Connectivity & cloud
Wired and wireless links, IIoT gateways and cloud / dashboard back-ends so the product reports and updates in the field.
Prototyping & NPI
Fast working prototypes, design-for-manufacture review, and a clean hand-off from sample to production.
Documentation
BOMs, Gerbers, test specs, user and service manuals — the full pack, owned jointly or handed to you.
MANUFACTURE & TEST
Built and proven before it leaves
A design is only worth what the factory can reliably reproduce. Assembly, box build and test are in-house, so quality is ours to answer for.
- Procurement & kitting. Components sourced to the approved BOM, with alternates managed for availability and lifetime; kitted per batch.
- PCB & SMT assembly. Surface-mount and through-hole assembly of the boards — from prototype quantities to production batches.
- Box build & integration. Board into enclosure, wiring, connectors, display and fascia — the complete, assembled product, not a bare PCB.
- Functional test & burn-in. Every unit powered and functionally tested against a defined spec; burn-in to catch early-life failures before they reach your customer.
- QC, serialise & pack. Final inspection, serial numbering and firmware identity, your labelling and packaging — ready to dispatch under your brand.
Manufacturing services at a glance
Test jigs and functional-test specs are built alongside the product, so the same checks are applied to unit one and unit ten-thousand.
CAPABILITIES & TECH
The toolbox behind your product
Four decades of embedded work means the platform, protocol and connectivity your product needs is usually one we have already shipped.
| DOMAIN | WHAT WE WORK WITH |
|---|---|
| Processors | 8 / 16 / 32-bit microcontrollers, ARM Cortex-M / -A, application processors for Linux-class products |
| Firmware | Bare-metal and RTOS, bootloaders and field firmware update, embedded Linux where the product needs it |
| Industrial protocols | Modbus RTU / TCP, Profibus, Profinet, CAN, BACnet, RS232 / RS485, digital & analog I/O (4–20 mA / 0–10 V) |
| Connectivity | Ethernet, Wi-Fi, Bluetooth / BLE, GSM / GPRS / 4G, LoRa and RF, GPS |
| Cloud & IIoT | Device-to-cloud links, MQTT / REST, gateways and dashboards, remote monitoring & update |
| Interfaces & sensing | LED / LCD / TFT displays, keypads & touch, sensor front-ends, relays, motor & power control |
| Power | SMPS and linear supplies, battery and back-up, wide-input industrial rails |
| Enclosure | Sheet-metal and moulded, panel / DIN / wall mount, IP-rated field housings |
If your product needs a platform not listed here, it is almost certainly still within reach — ask.
ENGAGE & ROI
Four ways to work with us
From “here are the files, build it” to “here’s the idea, take it all the way” — pick the model that fits how much you want to own.
MODEL 01
Build to print
- You bring the design & BOM
- We procure, assemble, test & ship
- Batch or volume runs
- Your IP, our factory
For a proven design that needs a reliable manufacturer.
MODEL 02
Design & build (ODM)
- You bring the spec or the idea
- We design hardware, firmware & enclosure
- Prototype → production under one roof
- Jointly owned or licensed IP
For a product you want to own without a hardware team.
MODEL 03
White-label
- Start from a KVAR product or platform
- Rebrand, re-case and re-feature to you
- Fastest route to market
- Your name on proven hardware
For getting to market quickly on a working base.
MODEL 04
Re-engineer / sustain
- Obsolete parts designed out
- Legacy board modernised & re-tested
- Long-life supply & spares
- Keep an old product alive
For a product going obsolete you cannot afford to lose.
Why partner with KVAR
Bring the idea. Walk away with a product that ships under your name.
OEM & EMS engagements are scoped to the product — design content, volumes, test regime, IP ownership and support are agreed per programme, and a proposal is prepared against your requirement. KVAR Technologies has designed and manufactured embedded products for industrial applications for nearly four decades. Contact us with a spec, a sample or an idea for a confidential discussion under NDA.
NEXT STEP
Bring us a spec, a sample or an idea
- Tell us what you want built — a design to manufacture, a spec to realise, or a product to re-engineer
- We scope the programme — design content, volumes, test regime and IP — under NDA
- Prototype under one roof, then scale to volume with full test and traceability
Phone: 022 6899 0651-52 · 7506 059922 · Email: sales@kvartech.com
www.kvartech.com · Future-ready. Today.
