Compliance records that write themselves.
Continuous ambient air, stack and dust monitoring, a public display board at the site boundary, and a live feed to the authority — so the record exists before anyone asks for it.
Why hand-kept records fail
Sites under civic or court-mandated monitoring are usually keeping air-quality records by hand. The readings are taken on rounds, written into a register, and typed up when somebody has time. They are not continuous, they are not verifiable, and when an authority asks for the last ninety days there is a scramble that nobody wins.
Worse, a hand-kept record cannot warn you. By the time a reading is written down, the exceedance has already happened and the window to do anything about it has closed.
What we install
- Ambient air quality monitors in IP65 outdoor enclosures, at the site boundary or across a city, streaming to the cloud every minute with CPCB-aligned ambient logging.
- Stack and emission monitoring for process exhausts, with threshold alerts before an exceedance becomes a notice.
- Dust monitoring, including the ETS-3000 Mini for stack and ambient particulate, with purge, high and fault alarms.
- A government-compliant public display board at the boundary, showing current readings to anyone passing.
- A live API feed to the municipal body, so the authority sees the same data you do, in real time.
- Threshold alarms on site: logger, tower light and siren, with relay outputs to a gate or plant interlock.
- Cathodic protection logging for buried pipelines and tank farms, replacing technician rounds with remote test-post readings.
Where it is running
KVAR’s largest air-quality deployment began with construction sites in Mumbai under civic and court-mandated monitoring, delivered with Trace Engineering Solutions. The network is in service with the Brihanmumbai Municipal Corporation and is extending across Navi Mumbai, Kalyan-Dombivli, Pune and Pimpri-Chinchwad. Over a thousand KVAR devices report to our cloud every minute, round the clock, and air-quality monitors are a large and growing share of them.
Read the environmental monitoring deployment
What changes for the EHS officer
Three things, in order of how much people tell us they matter. Compliance reports generate themselves, so nobody spends a day assembling them. Threshold alerts arrive by SMS and e-mail while a deviation can still be corrected. And when an authority asks, the full continuous record is already there, timestamped and exportable, with no gap to explain.
Honest note on certification
Regulatory requirements differ by authority, by pollutant and by site category, and they change. Rather than make a blanket claim on a web page, send us the specific condition or notice you are working to and we will confirm in writing what our equipment meets and what it does not before you commit to anything.
Common questions
Will this satisfy our specific consent conditions?
Send us the condition as written. Requirements vary by authority, pollutant and site category, and we would rather confirm in writing against your actual notice than give you a general assurance that turns out not to cover your case.
Can we monitor one boundary point first?
Yes. A single boundary monitor with a display board is a common first installation, particularly for construction sites working to civic conditions. Adding points later uses the same cloud account.
Who sees the data?
You do, on dashboards and in reports. The authority sees it through the live API feed where that is required. Access is role-based, and an on-premise deployment is available where the data cannot leave your network.
What happens when a reading crosses a threshold?
An alert goes out by SMS and e-mail immediately, to whoever you nominate. The point is to give the EHS officer a window to act, rather than a record of something that already went wrong.
Who supports the equipment after installation?
Our own engineers. The monitors are built at Mahim, so spares and support come from the people who made them. Ask us about servicing arrangements for your site.
